Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser system that guards against key-cloning and hacking and vehicle theft. It can lower your insurance premiums and you may be eligible for incentives.
The Ghost immobiliser that is discreet and easy to operate is integrated into the ECU of the vehicle. This means that it is impossible to start the engine without an encrypted PIN code.
TASSA Approved
If you wish to stop your vehicle from being stolen with key cloning then you will need to get the TASSA verified Autowatch Ghost immobiliser system. This is the most advanced technology in car security. It will stop thieves from taking your key fobs and also prevent your vehicle from starting when your keys have been copied.
This device is the next generation and connects to the CAN data network of your vehicle. A personalised PIN code can be entered using the standard buttons on the dashboard, or on the steering wheel. The Ghost will stop the engine from beginning. It can be programmed using a variety of settings such as Gear Change Blocking (vehicle-dependent), Stall on Start (vehicle-dependent) or Lock Gearbox. It is completely undetectable and doesn't make use of radio frequency signals, which means that it is not detected by RF scanning equipment or a 'code grabber'.
The Ghost is a small weatherproof device that's completely sealed. It can be mounted on the dashboard or concealed within the vehicle. ghost vehicle immobiliser to other alarms and immobiliser systems on the market, this one is not a Thatcham Category-approved product, but is recognized by insurance companies as an effective anti-theft device. It comes with a 5-year warranty.
The TASSA verification process guarantees that any installation work done on the Ghost will be completed by a qualified and experienced installer. This gives the client, insurers and police confidence in the quality of any installation carried out. This also ensures that the installers adhere to the instructions of the manufacturer and correctly install the product. The installers who are members of TASSA have an unwavering dedication to excellence and making a real difference in the fight against crime.
Compatible with a broad range of vehicles
The Autowatch Ghost 2 immobiliser is an innovative device that safeguards your vehicle from key cloning. Its PIN code system is integrated into the ECU of your car making it harder for thieves to clone the keys or hack the vehicle's system. It is also discrete and is able to be easily installed in many vehicles including minivans as well as sports cars. It is also weatherproof, and small enough to hide out of sight. This makes it difficult for thieves.
Installation of the Ghost is easy and does not require any additional wiring. It is compatible with a variety of vehicles and communicates using the data network of the vehicle CAN. It can also be deactivated or shut off from the main display of the vehicle. The device is compatible with a variety of mobile apps that allow you to control the security of your vehicle remotely.
Despite its many advantages, despite its many benefits, Ghost has certain issues that could arise after it is installed. These issues could be caused by a variety of causes including malfunctioning wiring or a non-compliant mobile application. In these cases, the best solution is to contact a professional installer to resolve the problem.
Another issue that users face is difficulty in entering the sequence of disarming the Ghost. This is usually due to not remembering the proper sequence or not practicing it. However, the manual for the device provides an emergency code that can be used in the case of such issues.
Distinction
Autowatch Ghost is a discreet and sophisticated security system that protects your vehicle from theft. This device uses the vehicle's CAN data network to work and is completely inaccessible to thieves, which makes it a highly effective deterrent. It is also triggered by security systems, such as car alarms and sends real-time alerts to its owner. These features can assist police locate your vehicle in the event of theft.
This system can be put in place in just a few minutes and is compatible with the majority of vehicles. It is an TASSA approved aftermarket device compatible with vehicle trackers. Certain insurance companies recognize it. It is also tamper proof and silent, meaning that criminals will be unable to hear its operation. The Ghost immobiliser is also programmable to require a PIN that is up to twenty digits. This makes it virtually impossible to determine the PIN.
Another feature of the Ghost is that it is only activated when the vehicle is set to Service/Valet mode. This will prevent you from accidentally giving the PIN code to a mechanic or other person who might need access to the computer system of your vehicle. The Ghost also comes with a five-year warranty.
The Autowatch Ghost immobiliser is a revolutionary security device that can stop key cloning, ECU hacking and car theft. It's an aftermarket CAN bus device that is a great choice for both new and old vehicles. It's simple to install and operates quietly. This makes it possible to be fitted in any vehicle without cutting wires. You can also change your pin in a matter of minutes so that you only know it. The system also doesn't use code-grabbing or RF scanning technologies, which means it is almost undetectable.
Simple to use
Autowatch Ghost is a highly effective and innovative security system that disables the engine to prevent theft of the vehicle. It utilizes a personal code crafted by the owner of the vehicle which must be entered prior to the car can begin. This technology is extremely advanced and enhances the overall security of your vehicle and is a favorite choice among many motorists. The process of installing it isn't without challenges. It requires careful planning and attention to the smallest of details. This includes ensuring compatibility and relying on expert knowledge in compliance with legal regulations, as well as gaining an understanding of the Ghost II's operational complexities. Making these factors a priority will ensure an efficient installation and optimal functionality.
The Ghost II is a silent system that is not spotted by thieves. It is also compact and weatherproof, making it difficult to break in. It is compatible with CAN Lenastark, CAN, and other vehicles. It can even be used in vehicles where the battery needs to be isolated for maintenance. The Ghost 2 has a Transport Mode that disables the device when your car is being rented or loaned.
To use the Ghost 2, you must have a unique PIN code that must be entered prior to starting the vehicle. Installers will assign a default code, but it is recommended to change it as quickly as possible to ensure your security. The device can go into sleep mode in order to conserve battery power, but it will awaken if it detects an engine management signal. This feature can be turned off within the Settings menu. It is advised to only use the Ghost immobiliser when your vehicle is being driven, and to always lock it before leaving it unattended.
Easy to install
The Autowatch Ghost II is an advanced security device that prevents car theft by disabling the vehicle's engine. It operates by using a personal code that only the owner knows and is a reliable deterrent against thieves. However, the installation process requires meticulous preparation and a keen eye for particulars. By ensuring compatibility, relying upon expert expertise in compliance with legal regulations and fully understanding the system's functions, you can make sure that the installation process is smooth and derive the maximum benefit from this security device.
This unique CANbus immobiliser from Autowatch is easy to install, and works silently so criminals cannot hear it operating. It makes use of CAN bus communications to communicate with the vehicle. Compatible with a broad variety of vehicles. It's a revolutionary advancement in the safety of vehicles. It also protects your car from key cloning, hacking and theft of your car, since it will not start without the proper pin code. It's weatherproof and small, so it's hard for criminals to spot it or modify it.
To begin working with your Ghost Immobiliser To begin, review the wiring diagram for your vehicle and identify the CAN high (CAN H) and the CAN low (CAN L) wires. Then, connect the CAN high to the CAN low and the low wire to the ECU. The wires are located under the dashboard, or near the engine.
It is recommended to employ an experienced and reputable installer to install your Ghost immobiliser. This way, you can be certain that the system has been installed correctly and that it will not hinder the functionality of your vehicle. The installer will also be able to provide guidance on how best to use your new device.